Our neighbors at the event last weekend (Betsey and Warren of Traditional Treasures), suggested some conventions we should try selling at: Reenactor Fest (RF), CyPhan, and C2E2.
We did do the second local-ish RF (it is/was also held in the Gettysburg area), which was at the Starship Hilton in Arlington Heights. There were capital-I Issues at that time, but some of them were hotel-specific, and Betsey said that the others have also been resolved. Part of the problem at that time was that I felt we didn't have historically authentic enough merchandise, but the Urbiks think we'll do fine - it sounds like the attendance has broadened.
This year RF had, as I understand it, all of Pheasant Run's convention-type space. In addition to vendors there was space for people to set up day camps, and what sounded like a big display of WWII vehicles, all indoors. Sounded pretty cool, in fact. The Urbiks said it would be back at Pheasant Run again for 2013. Pheasant Run is another few miles south of work, but from my one trip there on a Saturday morning for the Stitches Marketplace (vendor hall for a stringy bits convention), the commute was about the same as my commute to work. So pretty much by definition within commuting distance.
Currently the 2012 RF website is still up (it was in the first half of February), so I sent mail asking for vendor information for 2013 when available. Unless it falls on the same weekend as Capricon (IIRC RF is usually a week before Cap) I think we'll be giving it a try. Ron and Xap are running the Capricon Cafe again next year, and I'm kinda committed to working the Cafe myself.
CyPhan is by the same organizer as RF, and it looks like this is year three. I think I skipped it the first year because of a timing conflict with DucKon? Maybe something else? Last year we didn't do much of anything. This year I'd see if I could still get in, except that it's the weekend before MuseCon. It's also in Rosemont, a town I despise for that sort of thing (parking, getting there, union fees, yadda yadda), but the date conflict with Muse is the killer. If there was one week between I might have a case of lost marbles and consider it, but not back-to-back.
Betsey described C2C2 as being similar to Comic-Con. Aah, here we go: c2ec.com (whodathunkit!), The Chicago Comic and Entertainment Expo, April 13-15, McCormick Place. I think Betsey had said they're full, and I don't think we're quite right for it, but I checked out check out vendor information for grins . . . Erk. No prices for a basic booth listed, which to me is a bad sign in that "if you have to ask, you don't want to know" sort of way. What's interesting is the stuff there is information on - load-in/load-out rules depending on vehicle type (anything larger than a van gets shuffled off to a marshalling yard), trade-show-type booth furniture rental, and the trumpeting of "you can do things yourself now!" - as is, I can set up my own displays, not pay union rates for riggers, etc. to do it.
A while back, mostly for amusement value, I checked out the vendor information for some of the other local Ginormacons - ACen (Anime Central), MFF (Midwest FurFest), and Chicon Mumble (7? Whatever - it's this year's WorldCon, which is in a different city every year).
MFF 2011 was in November at the Hyatt Regency O'Hare, in Rosemont. It had the least painful pricing, but still high compared to smaller cons like Cap and Windy. Yes, Cap and Windy are small, comparatively. OTOH, you're also paying for all the traffic of a ginormicon, so not so bad, really.
ACen is in April, same hotel as MFF. The prices for vendor booths seemed terrible at first, but each space also comes with a generous number of memberships/badges. ACen has got, hands down, the most complex pricing, although they do a decent job of explaining it. You pay for your base booths, then you do upgrades for premium spaces/locations. And then there's the Donald E. Stephens Convention Center Complexity - there's rules for when you can get assisted load-in and load-out (for a fee!) vs. DIY, trade-show-type booth furniture rental, yadda yadda. Interesting reading, if nothing else. I don't know that I have the right merchandise, but I can see that the cost can be worth it.
Chicon is at the Hyatt Regency Chicago. The vendor booth prices are even higher than ACen's (although they appeared cheaper until I read a bit farther), as they don't include any (pricey) memberships.
Interestingly, Chicon and the MFF vendor information include nothing about load-in/load-out, booth furniture rental, etc. which is found for ACen or C2E2. I wonder if it's a venue difference, in that they've got vendors in space that isn't a big "convention center" ala Stephens (formerly Rosemont Horizon) or McCormick Place.
Yes, looking at these ginormicons is why I was amusing myself yesterday by trying to fit everything in a 10' x 10' space - I don't expect to be at a convention like one of those any time soon, but it got me thinking.
Friday, March 2, 2012
Still More Ideas and Continuing Projects
Driving to work is a fertile time for my imagination, especially as we still haven't gotten a Round Tuit to put an inexpensive radio in the Kia.
Table Arrangements
Yesterday morning I was trying to decide if there was any way I could actually fit Otter Necessities into a 10' x 10' booth (been looking at other events/conventions to do, post on that in a holding pattern). I cut out some 1"=2' tables, road cases, and gridwall belt displays (quarter-circles), drew boxes on paper, and started pushing bits around.
and pushing
and pushing
If I ever have to do an event with only 10' x 10' of space, I want a lot more gridwall, and it's going to have to be pretty much one of us working the booth at a time. 18" wide tables might also help.
10' x 20' is my preferred amount of space. 8' x 16' is a bit more squished, but manageable. If I have 16-20' of "front" space, the amount behind is negotiable.
Other Display Natter
When we were cleaning up around the big sewing machine Monday night I put some hooks up on the shelves - big forged iron hooks we got a blacksmith to make years ago, 9-12" long, with a rounded hook on one end, square hook (to hang over a two-by) on the other. This morning I had the thought that those would work on gridwall - hang them from the gridwall by the rounded hook, and hang dog leashes (which I hadn't quite figured out a good way of displaying), mug loops, or whatever from the square hook. I just need to remember to move the hooks to the bin with the other display hardware.
Continuing on the gridwall theme, we have 8 sections, 2' wide, 6' tall. By MuseCon I want to get at least one more piece, so that we can cable-tie them into triangles for signage. Other local conventions do this already with WindyCon's grid panels, which are also used for most of the local art shows. I don't think MuseCon is big enough yet to need/afford rental of the WindyCon panels, but we may find the few I have useful.
Trailers
Trailer shopping is getting more active. I really need to get income tax done so we can get the tax return. One co-worker got her return in something like 8 days, but she filed early, and a radio report last week said something like 2-3 weeks.
I called one dealer (R.A. Adams, McHenry, IL) today to get an idea of their prices. I asked about 5' x 8', enclosed, with a drop gate (so it forms a ramp). The salesman told me their starting price, then pointed out that because 5x8 trailers typically have a lower ceiling than bigger trailers with that type of gate, it means a shorter, and thus steeper ramp. He said he actually sells very few of them, and suggested a 5x8 trailer with doors that swing to the side(s), which are actually cheaper than drop gate trailers.
He could be trying to push something he has more of on his lot, but at the same time, he was suggesting a cheaper trailer than what I inquired about. I think this one is points to the salesman for suggesting based on need, rather than price/commission. In any case, it's now a factor we'll keep in mind when we start looking at trailers in person.
Winching the Road Cases
The mounting bracket for the winch arrived yesterday. It's smaller than either of us expected. Partly, I suspect, because we're both thinking of bigger winches and bigger vehicles (it is a bracket for an ATV, after all). It is in scale with the winch. It sounds like it isn't going to cause major issues with how Ron was planning to build a stand.
Mobile WiFi Hotspots
I checked all the carriers in this region I could think of. The vast majority immediately wiped themselves out by requiring 2-year, pay-every-month regardless of usage contracts. The survivors were Virgin and Cricket.
Virgin is the knida-winner with the only obvious pay-as-you-go data plan for their widget. I don't see a strictly pay-as-you-go plan for Cricket's wireless hot spot service/device (it is available for some phones), but their web page advertises that you can cancel a plan whenever you want, and no activation fees. I didn't read in more detail to see if they have anything against activating it for one month, then deactivating until you think you're likely to need it again.
If we decide to get a mobile wifi hotspot widget, I'll have to do some more Virgin/Cricket comparing. Another option is that when (not really an "if" any more) Ron gets an iPad, we get Verizon service for it, instead of ATT. (Verizon being the other service with the best coverage in the Midwest, based on my not-especially-intensive research).
Steampunk Pockets
Ron machine-sewed the single small pocket on Wednesday. It looks pretty good, but we do need to adjust the tension on the big sewing machine so that the next one looks better. Waiting on the Fire Mountain Gem order (expected Tuesday, sigh) to finish, you'll have to wait until then for pictures.
Hopefully I'll have the vertical stack done by then, also. Yes, still slogging along. The upper pocket is completely done now; lower one needs the front sewn on and the flap sewn down. Did come with me to work yesterday and today, since I didn't have leftovers to fit into my bag, and because I'd like to get the murmfle things done.
Weekend Plans
It looks like we'll probably be starting one of the big "Beer Gut" bags this weekend, for an overseas customer that likes the style well enough to pay the cost of shipping (consulted GT, apparently slow-but-cheap shipping is no longer an option unless you have enough items to fill a container, or at least a pallet). But that won't take large amounts of our attention, mostly it'll just be sitting on the mold unattended.
I may take a break from sewing the pockets to get some of the soft pouches I've cut out ready to lace. I'll probably also cut out a vertical stack set of the steampunk pockets in browns for Ron to sew, with the currently-secret spiffy modification(s).
I got a piece of lexan last weekend for a template made for the curve I use on all the corners for the pockets, I need to get that, and the soft pouch pattern I think will fit with it onto the lexan so Ron or Robin can do the cutting for me. Having a nice firm template for the corner would be nice. A pair of cutting dies would be even better, but a template is significantly cheaper, and it isn't a fussy curve to cut by hand.
Other things on the Otter Necessities to-do list that may or may not happen this weekend include slitting and braiding the belts I cut out a couple weeks ago, replacing old hardware on belts, and making more frogs with some of the old hardware.
And I suppose I should do boring housekeeping things like mopping the kitchen floor (dogs are tracking in lots of mud through the dog door).
Table Arrangements
Yesterday morning I was trying to decide if there was any way I could actually fit Otter Necessities into a 10' x 10' booth (been looking at other events/conventions to do, post on that in a holding pattern). I cut out some 1"=2' tables, road cases, and gridwall belt displays (quarter-circles), drew boxes on paper, and started pushing bits around.
and pushing
and pushing
If I ever have to do an event with only 10' x 10' of space, I want a lot more gridwall, and it's going to have to be pretty much one of us working the booth at a time. 18" wide tables might also help.
10' x 20' is my preferred amount of space. 8' x 16' is a bit more squished, but manageable. If I have 16-20' of "front" space, the amount behind is negotiable.
Other Display Natter
When we were cleaning up around the big sewing machine Monday night I put some hooks up on the shelves - big forged iron hooks we got a blacksmith to make years ago, 9-12" long, with a rounded hook on one end, square hook (to hang over a two-by) on the other. This morning I had the thought that those would work on gridwall - hang them from the gridwall by the rounded hook, and hang dog leashes (which I hadn't quite figured out a good way of displaying), mug loops, or whatever from the square hook. I just need to remember to move the hooks to the bin with the other display hardware.
Continuing on the gridwall theme, we have 8 sections, 2' wide, 6' tall. By MuseCon I want to get at least one more piece, so that we can cable-tie them into triangles for signage. Other local conventions do this already with WindyCon's grid panels, which are also used for most of the local art shows. I don't think MuseCon is big enough yet to need/afford rental of the WindyCon panels, but we may find the few I have useful.
Trailers
Trailer shopping is getting more active. I really need to get income tax done so we can get the tax return. One co-worker got her return in something like 8 days, but she filed early, and a radio report last week said something like 2-3 weeks.
I called one dealer (R.A. Adams, McHenry, IL) today to get an idea of their prices. I asked about 5' x 8', enclosed, with a drop gate (so it forms a ramp). The salesman told me their starting price, then pointed out that because 5x8 trailers typically have a lower ceiling than bigger trailers with that type of gate, it means a shorter, and thus steeper ramp. He said he actually sells very few of them, and suggested a 5x8 trailer with doors that swing to the side(s), which are actually cheaper than drop gate trailers.
He could be trying to push something he has more of on his lot, but at the same time, he was suggesting a cheaper trailer than what I inquired about. I think this one is points to the salesman for suggesting based on need, rather than price/commission. In any case, it's now a factor we'll keep in mind when we start looking at trailers in person.
Winching the Road Cases
The mounting bracket for the winch arrived yesterday. It's smaller than either of us expected. Partly, I suspect, because we're both thinking of bigger winches and bigger vehicles (it is a bracket for an ATV, after all). It is in scale with the winch. It sounds like it isn't going to cause major issues with how Ron was planning to build a stand.
Mobile WiFi Hotspots
I checked all the carriers in this region I could think of. The vast majority immediately wiped themselves out by requiring 2-year, pay-every-month regardless of usage contracts. The survivors were Virgin and Cricket.
Virgin is the knida-winner with the only obvious pay-as-you-go data plan for their widget. I don't see a strictly pay-as-you-go plan for Cricket's wireless hot spot service/device (it is available for some phones), but their web page advertises that you can cancel a plan whenever you want, and no activation fees. I didn't read in more detail to see if they have anything against activating it for one month, then deactivating until you think you're likely to need it again.
If we decide to get a mobile wifi hotspot widget, I'll have to do some more Virgin/Cricket comparing. Another option is that when (not really an "if" any more) Ron gets an iPad, we get Verizon service for it, instead of ATT. (Verizon being the other service with the best coverage in the Midwest, based on my not-especially-intensive research).
Steampunk Pockets
Ron machine-sewed the single small pocket on Wednesday. It looks pretty good, but we do need to adjust the tension on the big sewing machine so that the next one looks better. Waiting on the Fire Mountain Gem order (expected Tuesday, sigh) to finish, you'll have to wait until then for pictures.
Hopefully I'll have the vertical stack done by then, also. Yes, still slogging along. The upper pocket is completely done now; lower one needs the front sewn on and the flap sewn down. Did come with me to work yesterday and today, since I didn't have leftovers to fit into my bag, and because I'd like to get the murmfle things done.
Weekend Plans
It looks like we'll probably be starting one of the big "Beer Gut" bags this weekend, for an overseas customer that likes the style well enough to pay the cost of shipping (consulted GT, apparently slow-but-cheap shipping is no longer an option unless you have enough items to fill a container, or at least a pallet). But that won't take large amounts of our attention, mostly it'll just be sitting on the mold unattended.
I may take a break from sewing the pockets to get some of the soft pouches I've cut out ready to lace. I'll probably also cut out a vertical stack set of the steampunk pockets in browns for Ron to sew, with the currently-secret spiffy modification(s).
I got a piece of lexan last weekend for a template made for the curve I use on all the corners for the pockets, I need to get that, and the soft pouch pattern I think will fit with it onto the lexan so Ron or Robin can do the cutting for me. Having a nice firm template for the corner would be nice. A pair of cutting dies would be even better, but a template is significantly cheaper, and it isn't a fussy curve to cut by hand.
Other things on the Otter Necessities to-do list that may or may not happen this weekend include slitting and braiding the belts I cut out a couple weeks ago, replacing old hardware on belts, and making more frogs with some of the old hardware.
And I suppose I should do boring housekeeping things like mopping the kitchen floor (dogs are tracking in lots of mud through the dog door).
Wednesday, February 29, 2012
More New Ideas
I had another idea for a new thing to do on/with/to pouches, and Ron tells me it isn't hare-brained. It will, however, lead to the purchase of more stuff, from at least three different suppliers. For that reason, it will probably wait a little while, but probably less than a month.
It will also mean another variation(s) to try to keep in stock. Which: AAARGH! But also: more choices lead to more sales. Fortunately, storage of the new stuff should only be a minor issue, it should work into empty spaces in existing storage solutions.
Which reminds me, when working on the single small pocket last night, Ron discovered that one of the shallow plastic tackle boxes I keep punches in suffered fatal damage over the weekend. I know one if its small cousins had also been holed, but I had a spare. I suspect both were damaged when the big bins shifted on the way to the event Saturday.
The question becomes: stop at Cabela's and see if I can get another box of the same style/size; or shift to a different solution, with the sub-option of double-checking what's lurking in the basement in the way of tool boxen. The tackle boxes the punches are currently in live in a fairly dead space in the dining room, which a bigger tackle/tool box would not do. Given that I'm kind of trying to continue cleaning up the dining room, moving things out of a dead space into another part of the room is not an attractive option. Perhaps I'll measure said dead space and see if there are any better storage solutions available that would still fit.
Ron continued work on the single (test) pocket last night. He was hoping to get as far as sewing, but that decided that the gusset I'd cut was too stiff to try sewing without gluing first, and that he wanted to give the glue plenty of time to dry. He also noted and came up with a solution to a machine-sewing problem that's not an issue with hand-sewing (lumpy bits which would cause significant issues when trying to machine-sew something are often only minor annoyances when hand-sewing, and then only because the thread likes to wrap around and hold onto said lumpy bits).
I'm not being patient about my Fire Mountain Gems order. Reading their shipping information it should ship today, from Oregon, FedEx ground/home delivery. That probably means delivery early next week. Fire Mountain doesn't have a way to look at past/outstanding orders, so unless they send me a tracking number package arrival is going to be a surprise.
Still chugging away on the vertical-stack pockets. I can't remember if I nattered about it before or not, I'm only working on them in the evenings, as I decided they've gotten too bulky to schlep back and forth to the office to work on at lunchtime. If machine-sewing does not turn out to be a viable solution, I'm not sure I'm going to be making many more, they're a lot of work. Especially since in the evenings I also have time-sinks such as making dinner and doing dishes.
Oh, to be truly and filth-ily rich, so I could have staff to do the cooking whenever I didn't want to, and to do the pesky cleaning-type housekeeping. Which would require a much bigger house. Ooh, that would be tragic. Or staff that didn't live in, which would also be ok, as it would only leave us with after-hours emergency messes. And while I'm at it, I'd like a pony. No, a draft horse. Whatever. And stable staff, too. That's it! I have to win mega-billions in the lottery! Or be blessed by the Money Fairy! Whichever, they're equally (im)plausible.
It will also mean another variation(s) to try to keep in stock. Which: AAARGH! But also: more choices lead to more sales. Fortunately, storage of the new stuff should only be a minor issue, it should work into empty spaces in existing storage solutions.
Which reminds me, when working on the single small pocket last night, Ron discovered that one of the shallow plastic tackle boxes I keep punches in suffered fatal damage over the weekend. I know one if its small cousins had also been holed, but I had a spare. I suspect both were damaged when the big bins shifted on the way to the event Saturday.
The question becomes: stop at Cabela's and see if I can get another box of the same style/size; or shift to a different solution, with the sub-option of double-checking what's lurking in the basement in the way of tool boxen. The tackle boxes the punches are currently in live in a fairly dead space in the dining room, which a bigger tackle/tool box would not do. Given that I'm kind of trying to continue cleaning up the dining room, moving things out of a dead space into another part of the room is not an attractive option. Perhaps I'll measure said dead space and see if there are any better storage solutions available that would still fit.
Ron continued work on the single (test) pocket last night. He was hoping to get as far as sewing, but that decided that the gusset I'd cut was too stiff to try sewing without gluing first, and that he wanted to give the glue plenty of time to dry. He also noted and came up with a solution to a machine-sewing problem that's not an issue with hand-sewing (lumpy bits which would cause significant issues when trying to machine-sew something are often only minor annoyances when hand-sewing, and then only because the thread likes to wrap around and hold onto said lumpy bits).
I'm not being patient about my Fire Mountain Gems order. Reading their shipping information it should ship today, from Oregon, FedEx ground/home delivery. That probably means delivery early next week. Fire Mountain doesn't have a way to look at past/outstanding orders, so unless they send me a tracking number package arrival is going to be a surprise.
Still chugging away on the vertical-stack pockets. I can't remember if I nattered about it before or not, I'm only working on them in the evenings, as I decided they've gotten too bulky to schlep back and forth to the office to work on at lunchtime. If machine-sewing does not turn out to be a viable solution, I'm not sure I'm going to be making many more, they're a lot of work. Especially since in the evenings I also have time-sinks such as making dinner and doing dishes.
Oh, to be truly and filth-ily rich, so I could have staff to do the cooking whenever I didn't want to, and to do the pesky cleaning-type housekeeping. Which would require a much bigger house. Ooh, that would be tragic. Or staff that didn't live in, which would also be ok, as it would only leave us with after-hours emergency messes. And while I'm at it, I'd like a pony. No, a draft horse. Whatever. And stable staff, too. That's it! I have to win mega-billions in the lottery! Or be blessed by the Money Fairy! Whichever, they're equally (im)plausible.
Tuesday, February 28, 2012
New Steampunk-Ish Pouch Progress
Our Sunday trip to Cabela's was not just to look for winch mounting plates. We were also picking up parts for the more steampunk-ish modification to the vertically-stacked pockets. I'm still keeping details of that secret, I'm just a creep that way, grin.
Sunday afternoon, after Safari on the iPad crashed and I lost a big chunk of blog post, I stomped out into the dining room and cut out the top part of the vertical pocket stack - just the small pocket and the belt loops. It was supposed to be a test for the steampunk-ish modification as well as machine-sewing. However, we realized that part of the modification wasn't going to work out as well as we'd thought, and also that I need to make a modification to the pocket flap. Happily, we figured that out while it was still in pieces, so making changes are easy (and less annoying to boot).
After we made the big sewing machine accessible and usable, and Ron gave it a good going-over last night, I re-claimed my chair and cut out the modified pocket flap, punched it for lacing, and got the lacing done before going up to bed. That means that things are pretty much ready for Ron to start final assembly.
Going back to the basic vertically-stacked pockets, on Sunday afternoon I finished the first pass of sewing , and then tacked together the rest of the parts - the pocket fronts to the gussets, and the flaps. I think it's going to come out pretty well, now that you can really see how it's going to turn out (click to embiggen):
The fabric pockets these are based on have a strap toward the bottom that goes around the leg, to keep them from flopping around (kind of like on an old west gunfighter's rig). I had semi-forgotten about that until Friday night when Xap asked me if I was going to add one. We dithered a bit, since the backing leather makes mine less floppy, and then we had Robin put them on. The consensus was that the strap would be unnecessary, which is a bonus for kilt-wearers. After trying the pockets on, Robin was asking how hard they are to assemble, as he's only done a paperback book cover. Not hard, I said, especially if machine-sewing them works out. We then digressed on to discussing the more steampunk-ish modifications to the pockets in general, and what Robin might like in particular.
I was waiting for a friend to get back to me on sizing for some jewelry findings, but this morning decided I wanted bigger bits and pieces. This morning I had a little, um, accident at Fire Mountain Gems. I am told, however, that it was the kind of accident that it's easy to have when ordering from Fire Mountain. Yes, this is relevant to this natter.
Sunday afternoon, after Safari on the iPad crashed and I lost a big chunk of blog post, I stomped out into the dining room and cut out the top part of the vertical pocket stack - just the small pocket and the belt loops. It was supposed to be a test for the steampunk-ish modification as well as machine-sewing. However, we realized that part of the modification wasn't going to work out as well as we'd thought, and also that I need to make a modification to the pocket flap. Happily, we figured that out while it was still in pieces, so making changes are easy (and less annoying to boot).
After we made the big sewing machine accessible and usable, and Ron gave it a good going-over last night, I re-claimed my chair and cut out the modified pocket flap, punched it for lacing, and got the lacing done before going up to bed. That means that things are pretty much ready for Ron to start final assembly.
Going back to the basic vertically-stacked pockets, on Sunday afternoon I finished the first pass of sewing , and then tacked together the rest of the parts - the pocket fronts to the gussets, and the flaps. I think it's going to come out pretty well, now that you can really see how it's going to turn out (click to embiggen):
The fabric pockets these are based on have a strap toward the bottom that goes around the leg, to keep them from flopping around (kind of like on an old west gunfighter's rig). I had semi-forgotten about that until Friday night when Xap asked me if I was going to add one. We dithered a bit, since the backing leather makes mine less floppy, and then we had Robin put them on. The consensus was that the strap would be unnecessary, which is a bonus for kilt-wearers. After trying the pockets on, Robin was asking how hard they are to assemble, as he's only done a paperback book cover. Not hard, I said, especially if machine-sewing them works out. We then digressed on to discussing the more steampunk-ish modifications to the pockets in general, and what Robin might like in particular.
I was waiting for a friend to get back to me on sizing for some jewelry findings, but this morning decided I wanted bigger bits and pieces. This morning I had a little, um, accident at Fire Mountain Gems. I am told, however, that it was the kind of accident that it's easy to have when ordering from Fire Mountain. Yes, this is relevant to this natter.
Monday, February 27, 2012
Found: Floor!
There's a floor out in the dining room!
Ron got dinner started while I was on the way home, so once it was in the oven I went out and started doing further cleanup so the big sewing machine is usable. And Ron helped me find places to put things away, instead of just rearranging the mess.
If I keep this up the room is going to be neat again. Be still my heart. I might even be able to set things up so I can work out there while Ron is using the sewing machine, but I'm not holding my breath on that one - there's a lot of stuff out there, and there's only so much condensing we can do (before we reach critical mass and things collapse into a black hole. Which would be bad.)
At the moment Ron is out giving the sewing machine a thorough cleaning and oiling. In a little bit I'll go out and cut and punch lacing holes in a small steampunk pocket flap.
Ron got dinner started while I was on the way home, so once it was in the oven I went out and started doing further cleanup so the big sewing machine is usable. And Ron helped me find places to put things away, instead of just rearranging the mess.
If I keep this up the room is going to be neat again. Be still my heart. I might even be able to set things up so I can work out there while Ron is using the sewing machine, but I'm not holding my breath on that one - there's a lot of stuff out there, and there's only so much condensing we can do (before we reach critical mass and things collapse into a black hole. Which would be bad.)
At the moment Ron is out giving the sewing machine a thorough cleaning and oiling. In a little bit I'll go out and cut and punch lacing holes in a small steampunk pocket flap.
Midlands A&S Fair Report & Afterwards
I got a bunch typed out yesterday, then Safari on the iPad crashed, and I hadn't saved, so everything I had written was gone. So I pouted and didn't start over.
The Midlands Arts & Sciences Fair was decent, for the attendance. Unfortunately, that seems to have been fairly small. It was 2 hours west of Palatine, so I suspect that some of the greater-Chicago-area people didn't go (a suspicion reinforced by a couple comments on the Ayreton list). We didn't expect it to be a huge event, but were hoping it would be a little bigger than it was. Oh well, it's hard to predict going in.
Lunch was not a disappointment, however. $5 for orange slices sprinkled with cinnamon, dates, hummus, pita, Moroccan semolina bread, seasoned/spiced olives, beef tagine with apricots or chicken tagine, some kind of drink (I think lemonade), and orange cake.
Even though I skipped the olives (I just don't like olives), they looked like they'd be good. The hummus needed salt, but wasn't bad. The pita was decent commercial, and only suffered in that Friday night we had multiple kinds of fresh hot Indian/Pakistani flatbreads with dinner. The meat in the beef tagine was a tad chewy, but Ron said the chicken wasn't. Whoever made the tagines should be congratulated, they managed to spice them enough so that they weren't bland, but they weren't so spicy as to risk turning people off. That's a tough balance to get. The servings of the semolina bread and orange cake were huge, and they were both good. The cake wasn't too sweet, either. All in all, one of the better SCA lunches we've had. I need to go check and see if there are recipes on the group's website - drat, no.
Loading the trailer Friday night was a bit rocky - Ron had backed the trailer too close to the gate, so there wasn't really a flat landing pad between the two sets of ramps; and Robin was working with more enthusiasm than discretion (considering the trailer ramps don't have side/guide rails to prevent road cases from rolling off sideways). Unloading/loading at the event site went well. Even though lifting is still required, Ron much prefers the two road cases to umpty bins. We still had three bins (garb, fiber/stringy bits, and assorted last-minute-ish stuff), but they just got wheeled in and out on top of the green tool case.
We did have some shifting of the load on the way to the site, we think in part because of some of the hills involved in the drive. On the way home Ron packed and put the load bars in differently, and the result was much less shifting of the big cases. We'll only be taking 2 of the 6' tables in the future, 3 don't really fit. But we can take 2 of the 4' tables instead of just one.
The big green case is a definite improvement for belt storage - it is very easy to find the right kind of belt when one is needed. Ron did change how one drawer was packed, but that's minor. The case worked fine as a tabletop for receipt books, etc. Ron fought a bit with Numbers at first, but it looks like having him do the record-keeping on the iPad is going to work out.
Wireless coverage was a problem. Ron had only intemittent weak coverage, I never noticed I had any at all (ATT). Fortunately, Xap had coverage, and the Intuit app is available for her Android phone. They did try to set it up so merchants could use the local WiFi network, but we had login/connection issues. Our neighbors had a Virgin Mobile WiFi hotspot widget, but the building WiFi was interfering. Their plan is pay-as-you-go, we may investigate something like that as a backup - they say it's also nice at conventions when the hotel networks get busy. On the third hand, we haven't had any problems with cell/3G coverage at hotels.
Unloading the trailer yesterday morning went much better than loading Friday, even without Xap's help (which we had Friday). We had space between the two sets of ramps to get the big cases parked and do things in stages, instead of having to off of one and straight up the other. We told Robin we needed him to pay attention to steering and not just be strong like ox and smart like tractor, so he did. And next time there will be a winch to make it easier yet.
Yesterday morning, after dropping off the trailer, we looked for winch mounting plates at Cabela's - they have a bunch that can be ordered, but nothing in stock and no pictures. In the afternoon I checked the winch manufacturer's website (superwinch.com), and 4 pages of mounting plates for all the different models of ATVs, with pictures. We found one that looked good for adaptation to a fixed stand, and Ron ordered it. The company is Connecticut, so hopefully we'll have it before the weekend, so Ron and Robin can work on building a stand.
That isn't quite the end of our accomplishments for the weekend, but I think I've nattered on (and on and on) quite enough. So I'll leave you with a panoramic view (taken with and stitched together on Ron's phone!) of our setup Saturday. Click to embiggen. The yellow road case is against the wall, between the two displays of belts. The big green case is behind the gridwall that's behind/between the two tables full of pouches.
The Midlands Arts & Sciences Fair was decent, for the attendance. Unfortunately, that seems to have been fairly small. It was 2 hours west of Palatine, so I suspect that some of the greater-Chicago-area people didn't go (a suspicion reinforced by a couple comments on the Ayreton list). We didn't expect it to be a huge event, but were hoping it would be a little bigger than it was. Oh well, it's hard to predict going in.
Lunch was not a disappointment, however. $5 for orange slices sprinkled with cinnamon, dates, hummus, pita, Moroccan semolina bread, seasoned/spiced olives, beef tagine with apricots or chicken tagine, some kind of drink (I think lemonade), and orange cake.
Even though I skipped the olives (I just don't like olives), they looked like they'd be good. The hummus needed salt, but wasn't bad. The pita was decent commercial, and only suffered in that Friday night we had multiple kinds of fresh hot Indian/Pakistani flatbreads with dinner. The meat in the beef tagine was a tad chewy, but Ron said the chicken wasn't. Whoever made the tagines should be congratulated, they managed to spice them enough so that they weren't bland, but they weren't so spicy as to risk turning people off. That's a tough balance to get. The servings of the semolina bread and orange cake were huge, and they were both good. The cake wasn't too sweet, either. All in all, one of the better SCA lunches we've had. I need to go check and see if there are recipes on the group's website - drat, no.
Loading the trailer Friday night was a bit rocky - Ron had backed the trailer too close to the gate, so there wasn't really a flat landing pad between the two sets of ramps; and Robin was working with more enthusiasm than discretion (considering the trailer ramps don't have side/guide rails to prevent road cases from rolling off sideways). Unloading/loading at the event site went well. Even though lifting is still required, Ron much prefers the two road cases to umpty bins. We still had three bins (garb, fiber/stringy bits, and assorted last-minute-ish stuff), but they just got wheeled in and out on top of the green tool case.
We did have some shifting of the load on the way to the site, we think in part because of some of the hills involved in the drive. On the way home Ron packed and put the load bars in differently, and the result was much less shifting of the big cases. We'll only be taking 2 of the 6' tables in the future, 3 don't really fit. But we can take 2 of the 4' tables instead of just one.
The big green case is a definite improvement for belt storage - it is very easy to find the right kind of belt when one is needed. Ron did change how one drawer was packed, but that's minor. The case worked fine as a tabletop for receipt books, etc. Ron fought a bit with Numbers at first, but it looks like having him do the record-keeping on the iPad is going to work out.
Wireless coverage was a problem. Ron had only intemittent weak coverage, I never noticed I had any at all (ATT). Fortunately, Xap had coverage, and the Intuit app is available for her Android phone. They did try to set it up so merchants could use the local WiFi network, but we had login/connection issues. Our neighbors had a Virgin Mobile WiFi hotspot widget, but the building WiFi was interfering. Their plan is pay-as-you-go, we may investigate something like that as a backup - they say it's also nice at conventions when the hotel networks get busy. On the third hand, we haven't had any problems with cell/3G coverage at hotels.
Unloading the trailer yesterday morning went much better than loading Friday, even without Xap's help (which we had Friday). We had space between the two sets of ramps to get the big cases parked and do things in stages, instead of having to off of one and straight up the other. We told Robin we needed him to pay attention to steering and not just be strong like ox and smart like tractor, so he did. And next time there will be a winch to make it easier yet.
Yesterday morning, after dropping off the trailer, we looked for winch mounting plates at Cabela's - they have a bunch that can be ordered, but nothing in stock and no pictures. In the afternoon I checked the winch manufacturer's website (superwinch.com), and 4 pages of mounting plates for all the different models of ATVs, with pictures. We found one that looked good for adaptation to a fixed stand, and Ron ordered it. The company is Connecticut, so hopefully we'll have it before the weekend, so Ron and Robin can work on building a stand.
That isn't quite the end of our accomplishments for the weekend, but I think I've nattered on (and on and on) quite enough. So I'll leave you with a panoramic view (taken with and stitched together on Ron's phone!) of our setup Saturday. Click to embiggen. The yellow road case is against the wall, between the two displays of belts. The big green case is behind the gridwall that's behind/between the two tables full of pouches.
Thursday, February 23, 2012
Sewing, by Hand and by Machine
I think I may be a hand-stitching snob.
I've known for a while that when it comes to clothing and knitting that I'm a fiber snob - too much man-made fiber in my clothing is icky to wear, and too much in knitting yarn feels squeaky, or something - it's hard to describe.
But this morning I realized I may be a hand-stitching snob. It happened when we were discussing the vertically-stacked pockets, the next variation on them to make, and I mentioned that I don't think I'm going to get them done for the event Saturday. In reply, Ron pointed out that a lot of the sewing involved in the pockets could be done on the big sewing machine, and would go a lot faster.
I twitched, and hemmed, and hawed, and agreed. My only real comment against machine sewing was that hand-stitching looks nicer. Ron countered that we can shorten up the stitch length on the sewing machine (which will help the appearance). I agreed, and said that if we leave long tails so we can get all the ends to the back sides, and melt them off (so they don't fray), it would also help.
Therefore, I'll cut out another set of pockets for Ron to try machine-sewing. Which also means I need to clean up the big sewing machine (which is currently buried), and the area directly in front of it. We may also need to get Marmaduke and/or X1 to come and help Robin move it over away from the metal workbench, we haven't tried using the sewing machine since bringing the workbench up from the basement a while back. Not that those are bad thing to need to do, as we also need to make satchels and belt satchels, both of which are machine-sewn.
I've known for a while that when it comes to clothing and knitting that I'm a fiber snob - too much man-made fiber in my clothing is icky to wear, and too much in knitting yarn feels squeaky, or something - it's hard to describe.
But this morning I realized I may be a hand-stitching snob. It happened when we were discussing the vertically-stacked pockets, the next variation on them to make, and I mentioned that I don't think I'm going to get them done for the event Saturday. In reply, Ron pointed out that a lot of the sewing involved in the pockets could be done on the big sewing machine, and would go a lot faster.
I twitched, and hemmed, and hawed, and agreed. My only real comment against machine sewing was that hand-stitching looks nicer. Ron countered that we can shorten up the stitch length on the sewing machine (which will help the appearance). I agreed, and said that if we leave long tails so we can get all the ends to the back sides, and melt them off (so they don't fray), it would also help.
Therefore, I'll cut out another set of pockets for Ron to try machine-sewing. Which also means I need to clean up the big sewing machine (which is currently buried), and the area directly in front of it. We may also need to get Marmaduke and/or X1 to come and help Robin move it over away from the metal workbench, we haven't tried using the sewing machine since bringing the workbench up from the basement a while back. Not that those are bad thing to need to do, as we also need to make satchels and belt satchels, both of which are machine-sewn.
Wednesday, February 22, 2012
Pictures! We got Pictures!
Here it is, the picture post I've been threatening. Click pictures to embiggen.
First up, an illustration of why I bought a gross each of small- and medium-size binder clips. This is a round laced purse, where the gusset has been glued in. For every binder clip visible, there's another one on the other side. I also glued up a rectangular purse, which used at least as many binder clips.
Next, Lon learns that dropping all your pictures in at once and trying to rearrange and insert text in between is not a good idea. That way lies madness. OTOH, I learned how to get pictures from Gmail directly to Picasa Web Albums without downloading them to a computer first, and the same method can be used to get them from my phone to Picasa Web Albums.
On to little red bins in the big green tool chest. These are the buckle and dee drawers. You can see in each where I've turned a 1" x 2" bin to show where a 2" bin would fit.
Last night I worked on the vertically-stacked pockets. They're ready to have the edges of the flaps laced, and to have everything sewn together. To make the sewing a little easier I've tacked the belt loops and gussets down. In the second picture the pocket fronts are just sitting on the gussets to give you the general idea.
A Sad and Tragic Creature:
The cute little ATV winch, on the temporary test frame, and a roller fairlead, since not everybody knows what such a beastie is. This is the good one we found in the Cabela's Bargain Cave marked down about 75%.
And that's all I've got for today.
First up, an illustration of why I bought a gross each of small- and medium-size binder clips. This is a round laced purse, where the gusset has been glued in. For every binder clip visible, there's another one on the other side. I also glued up a rectangular purse, which used at least as many binder clips.
Next, Lon learns that dropping all your pictures in at once and trying to rearrange and insert text in between is not a good idea. That way lies madness. OTOH, I learned how to get pictures from Gmail directly to Picasa Web Albums without downloading them to a computer first, and the same method can be used to get them from my phone to Picasa Web Albums.
On to little red bins in the big green tool chest. These are the buckle and dee drawers. You can see in each where I've turned a 1" x 2" bin to show where a 2" bin would fit.
Last night I worked on the vertically-stacked pockets. They're ready to have the edges of the flaps laced, and to have everything sewn together. To make the sewing a little easier I've tacked the belt loops and gussets down. In the second picture the pocket fronts are just sitting on the gussets to give you the general idea.
A Sad and Tragic Creature:
The cute little ATV winch, on the temporary test frame, and a roller fairlead, since not everybody knows what such a beastie is. This is the good one we found in the Cabela's Bargain Cave marked down about 75%.
Tuesday, February 21, 2012
Backtracking for Moving Heavy Objects
Silly me, yesterday morning I left out chunks of what Ron had been working on.
Saturday morning we got lumber to make ramps to go from the side porch to the ground. Saturday afternoon, while Robin was doing election judge training, we went to Lowe's for the nice aluminum ramp tops they carry, and then to Cabela's to return the less-nice steel ones I'd picked up last week.
We had time to kill, so we went for a wander around Cabela's, including the "Bargain Cave". The most interesting thing we found in the Bargain Cave was a roller fairlead for an ATV winch, marked down from $50 to $13. At some point after buying the road cases I'd suggested using a come-along or winch to get them up and down the ramps to the ground, and I wasn't entirely joking. We decided to buy the fairlead because it was a great deal, and we probably would implement the winch idea at some point (especially if/when Robin ever moves out).
As we strolled toward the checkouts, Ron wondered if Cabela's carries ATV winches. I pointed out where they'd probably be (based on looking for the ramp ends), so we wandered over to take a look, and Ron found one - on sale. 2000 lb capacity, for <$100. It followed us home. It came with a fairlead, so Ron was going to leave the one we found in the Bargain Cave, but I over-ruled.
The winch is so tiny! So tiny and cute! The winch on my Jeep had a capacity of 8900 pounds, a much longer stash of heavier cable, and wasn't a low-profile model. Compared to that one, this one is cute and tiny, comparatively. Why, you may ask, did we not just re-purpose the winch from the Jeep? Because we bequeathed it to a friend when the Jeep went to the junkyard.
To continue: Saturday evening Ron and Robin knocked together a test platform out of scrap lumber and hooked the winch up to the battery out of Ron's motorcycle to test it. Worked fine. Then Ron started pondering how to power it. The winch is set up to run off of an ATV battery, so there's the possibly-dead batteries from the rototiller or my mostly-moribund motorcycle (anybody want a 1984 V65 Sabre with an untrustworthy ignition switch?). But to use it getting road cases up and down the ramp to the porch, it would be most convenient to get it to run from AC power, which is available a couple feet from the door.
Ron consulted several of our friends. One suggested a computer power supply, only problem there is that we've disposed of all our dead computers. After a bit of thinking, Ron went to the basement to fetch the large batter-charger/jump-starter that we don't use much any more, at about the same time that another friend of ours was sending e-mail suggesting exactly that. (I'd forgotten about it, as we also have a smaller/lighter/smarter charger that fits under the hood of a vehicle) Hooked up the charge/starter and the winch ran happily.
Ron and Robin need to build something to hold the winch in place on the porch, but still remain portable (no, I don't want a winch permanently mounted to the middle of the porch, thanks). They're still debating exactly how to do that. Not sure if it will end up using both fairleads, or just one - if one, we'll use the one we got in the Bargain Cave, it's nicer than the one that came with the winch. We'll also probably need to get a tow strap, or see if we still have the one that lived in the Jeep - not sure if there's quite enough cable to go the length of the porch and down the ramp. But that's minor.
On Sunday Ron and Robin built the ramps for the porch - 2xmumbles (10s, I think), with 1x4s on each side to act as rails and add extra stiffness. Robin can walk up one, but there's some bounce. Ron expects he'll have to add a stiffener or brace down to the porch steps, but they'll be fine for the event this weekend.
I do need to find/cut wide leather straps to hoist the end of the big green toolbox, kind of like movers' lift straps, and to control it going up/down ramps. The handle on it is only sturdy enough for moving/steering it on the flat, not going up or down ramps, and certainly not lifting it over a door sill.
Saturday morning we got lumber to make ramps to go from the side porch to the ground. Saturday afternoon, while Robin was doing election judge training, we went to Lowe's for the nice aluminum ramp tops they carry, and then to Cabela's to return the less-nice steel ones I'd picked up last week.
We had time to kill, so we went for a wander around Cabela's, including the "Bargain Cave". The most interesting thing we found in the Bargain Cave was a roller fairlead for an ATV winch, marked down from $50 to $13. At some point after buying the road cases I'd suggested using a come-along or winch to get them up and down the ramps to the ground, and I wasn't entirely joking. We decided to buy the fairlead because it was a great deal, and we probably would implement the winch idea at some point (especially if/when Robin ever moves out).
As we strolled toward the checkouts, Ron wondered if Cabela's carries ATV winches. I pointed out where they'd probably be (based on looking for the ramp ends), so we wandered over to take a look, and Ron found one - on sale. 2000 lb capacity, for <$100. It followed us home. It came with a fairlead, so Ron was going to leave the one we found in the Bargain Cave, but I over-ruled.
The winch is so tiny! So tiny and cute! The winch on my Jeep had a capacity of 8900 pounds, a much longer stash of heavier cable, and wasn't a low-profile model. Compared to that one, this one is cute and tiny, comparatively. Why, you may ask, did we not just re-purpose the winch from the Jeep? Because we bequeathed it to a friend when the Jeep went to the junkyard.
To continue: Saturday evening Ron and Robin knocked together a test platform out of scrap lumber and hooked the winch up to the battery out of Ron's motorcycle to test it. Worked fine. Then Ron started pondering how to power it. The winch is set up to run off of an ATV battery, so there's the possibly-dead batteries from the rototiller or my mostly-moribund motorcycle (anybody want a 1984 V65 Sabre with an untrustworthy ignition switch?). But to use it getting road cases up and down the ramp to the porch, it would be most convenient to get it to run from AC power, which is available a couple feet from the door.
Ron consulted several of our friends. One suggested a computer power supply, only problem there is that we've disposed of all our dead computers. After a bit of thinking, Ron went to the basement to fetch the large batter-charger/jump-starter that we don't use much any more, at about the same time that another friend of ours was sending e-mail suggesting exactly that. (I'd forgotten about it, as we also have a smaller/lighter/smarter charger that fits under the hood of a vehicle) Hooked up the charge/starter and the winch ran happily.
Ron and Robin need to build something to hold the winch in place on the porch, but still remain portable (no, I don't want a winch permanently mounted to the middle of the porch, thanks). They're still debating exactly how to do that. Not sure if it will end up using both fairleads, or just one - if one, we'll use the one we got in the Bargain Cave, it's nicer than the one that came with the winch. We'll also probably need to get a tow strap, or see if we still have the one that lived in the Jeep - not sure if there's quite enough cable to go the length of the porch and down the ramp. But that's minor.
On Sunday Ron and Robin built the ramps for the porch - 2xmumbles (10s, I think), with 1x4s on each side to act as rails and add extra stiffness. Robin can walk up one, but there's some bounce. Ron expects he'll have to add a stiffener or brace down to the porch steps, but they'll be fine for the event this weekend.
I do need to find/cut wide leather straps to hoist the end of the big green toolbox, kind of like movers' lift straps, and to control it going up/down ramps. The handle on it is only sturdy enough for moving/steering it on the flat, not going up or down ramps, and certainly not lifting it over a door sill.
Monday, February 20, 2012
Stick a Fork in it, I'm Done
Purses are ready for final assembly - stitch the dee holders in place, lace together, and put the shoulder straps on. Which is not an insignificant amount of work, but the stitching and lacing are fairly simple/brainless.
I told Robin that I was comfortably certain the cutting dies weren't in the dining room, and after looking in the tool drawers (which I hadn't technically looked in, but I've been in most of them for this and that thing over the weekend), he looked in the basement. In only a couple minutes he'd located them. I should either have him bring them up and put them on the shelves I expect to find them on, or else have them put them on the stand for the big press.
Worked on making belt loops for pouches - cutting out little rectangles. When I was cleaning/looking for the dies, I realized I had a significant amount of leather set aside for them. I was working on that after getting the purses to where I wanted, while waiting for Robin and Marmaduke to finish the miniature game they were playing on the cutting table.
Once they finished, and cleared most of their gaming paraphanalia, I cut strips for braided belts. I cut mostly wide ones, but I cut a few experimental narrow braided belts. Wide belts get a 5-strand braid, I'm going to see how a narrower belt looks with a 3-strand braid. Actually, I have a pretty good idea how it will look, the question is if they'll sell. I cut 2 or 3 in black, and a couple dark brown. I didn't need to cut wide braided belts of the other two browns, so didn't cut any narrow ones either. After cutting down the pieces of black and dark brown to no-longer-usable-for belts width, I brought them upstairs.
I needed the black for the new steampunkish project, which is a pair of vertically-stacked pockets. I got them fairly far along, but a few minutes ago I realized that I'd reached the point that I'm too tired to do any more safely. I still need to make the stitching holes for the belt loops and install the studs for the belt loops, and figure out where the latches go on the pocket fronts and install the latches. After those tasks all that will be left is lacing the pocket flaps and then stitching everything together. Survey of Robin and Marmaduke agreed with using rotary latches for the pockets, small version on the smaller upper pocket and larger version of the latch on the larger lower pocket. So that's what I'm doing.
However, a few minutes ago I realized I was too tired to continue safely. Er, um, I see I'm repeating myself. In part because this post isn't being written in the order you're reading it. Anyhow, I might be able to finish the things on the pockets listed above safely, but there's also a good chance I'd screw something up and make a mess. I'd rather not take that chance.
I did the stitching holes on these differently than I did Robin's, in part because I wasn't going to be able to glue to the leather I'd dyed black (at least not with rubber cement). The change was slightly more work in some ways, but it simplified things significantly in others. The test will be in stitching them together.
The chili is calling me. I think it's time to get myself some dinner, then probably go sit in the tub. Nighty-night...
I told Robin that I was comfortably certain the cutting dies weren't in the dining room, and after looking in the tool drawers (which I hadn't technically looked in, but I've been in most of them for this and that thing over the weekend), he looked in the basement. In only a couple minutes he'd located them. I should either have him bring them up and put them on the shelves I expect to find them on, or else have them put them on the stand for the big press.
Worked on making belt loops for pouches - cutting out little rectangles. When I was cleaning/looking for the dies, I realized I had a significant amount of leather set aside for them. I was working on that after getting the purses to where I wanted, while waiting for Robin and Marmaduke to finish the miniature game they were playing on the cutting table.
Once they finished, and cleared most of their gaming paraphanalia, I cut strips for braided belts. I cut mostly wide ones, but I cut a few experimental narrow braided belts. Wide belts get a 5-strand braid, I'm going to see how a narrower belt looks with a 3-strand braid. Actually, I have a pretty good idea how it will look, the question is if they'll sell. I cut 2 or 3 in black, and a couple dark brown. I didn't need to cut wide braided belts of the other two browns, so didn't cut any narrow ones either. After cutting down the pieces of black and dark brown to no-longer-usable-for belts width, I brought them upstairs.
I needed the black for the new steampunkish project, which is a pair of vertically-stacked pockets. I got them fairly far along, but a few minutes ago I realized that I'd reached the point that I'm too tired to do any more safely. I still need to make the stitching holes for the belt loops and install the studs for the belt loops, and figure out where the latches go on the pocket fronts and install the latches. After those tasks all that will be left is lacing the pocket flaps and then stitching everything together. Survey of Robin and Marmaduke agreed with using rotary latches for the pockets, small version on the smaller upper pocket and larger version of the latch on the larger lower pocket. So that's what I'm doing.
However, a few minutes ago I realized I was too tired to continue safely. Er, um, I see I'm repeating myself. In part because this post isn't being written in the order you're reading it. Anyhow, I might be able to finish the things on the pockets listed above safely, but there's also a good chance I'd screw something up and make a mess. I'd rather not take that chance.
I did the stitching holes on these differently than I did Robin's, in part because I wasn't going to be able to glue to the leather I'd dyed black (at least not with rubber cement). The change was slightly more work in some ways, but it simplified things significantly in others. The test will be in stitching them together.
The chili is calling me. I think it's time to get myself some dinner, then probably go sit in the tub. Nighty-night...
Cutting Dies AWOL
The dining room is neater than when I started out this morning, but the cutting dies I've been looking for are still AWOL. This includes the die needed to cut the holder for the dees that the shoulder strap of a purse attach to.
Fortunately, I found 4 black dee holders, so the purses are not stalled, and the die needed to cut parts for the steampunkish thing was not among the missing.
At this point I think I can safely declare the dies "Not in the Dining Room" and turn the search over to the person(s) who cleaned up the basement.
Looking for the dies must have been A Project, as I drew blood in the process (not serious). Also, I have a blister on my right ring finger as a result of working the purses. That is all.
Fortunately, I found 4 black dee holders, so the purses are not stalled, and the die needed to cut parts for the steampunkish thing was not among the missing.
At this point I think I can safely declare the dies "Not in the Dining Room" and turn the search over to the person(s) who cleaned up the basement.
Looking for the dies must have been A Project, as I drew blood in the process (not serious). Also, I have a blister on my right ring finger as a result of working the purses. That is all.
Working Away
Saturday was made of even more flail than usual, although in the morning the little bins for the big green tool bin arrived, and we got the hardware re-packed into them. I seem to have made a mis-calculation, and ordered 1" wide bins as space-fillers, when I could have gotten 2" ones. But they're not too expensive, so I'll probably not worry about returning/exchanging the 1" ones, and just get 2" ones.
Yesterday, since I was going to be dyeing things black anyway, I finished cutting a chunk of leather up into softish pouch parts, and then went out and dyed a whole bunch of things.
I worked on the black purses, and then got a pouch ready to lace up during the MuseCon meeting. I could have finished it at the meeting, as well as hemming the top of the pocket for the rectangular purse, but I decided the pouch needs a slight modification that would be easier if I didn't finish lacing up the sides.
After the meeting I worked on the purses some more, up to getting the gussets glued in, so they've been drying overnight. Then I moved on to another pouch.
Today the plan is to get the pouches ready for final assembly steps - sewing the dee holders onto the gussets, and lacing up. I also want to go downstairs, cut strips for braided belts and any other black belts we need out of a partial side we have.
After that, the remains of that side come upstairs to be used on the current steampunk-ish project. Yeah, I'm doing it in black (sigh). Black sells. I'm hoping to also get that ready for final assembly today, which means I should quit yakking and get to work...
Yesterday, since I was going to be dyeing things black anyway, I finished cutting a chunk of leather up into softish pouch parts, and then went out and dyed a whole bunch of things.
I worked on the black purses, and then got a pouch ready to lace up during the MuseCon meeting. I could have finished it at the meeting, as well as hemming the top of the pocket for the rectangular purse, but I decided the pouch needs a slight modification that would be easier if I didn't finish lacing up the sides.
After the meeting I worked on the purses some more, up to getting the gussets glued in, so they've been drying overnight. Then I moved on to another pouch.
Today the plan is to get the pouches ready for final assembly steps - sewing the dee holders onto the gussets, and lacing up. I also want to go downstairs, cut strips for braided belts and any other black belts we need out of a partial side we have.
After that, the remains of that side come upstairs to be used on the current steampunk-ish project. Yeah, I'm doing it in black (sigh). Black sells. I'm hoping to also get that ready for final assembly today, which means I should quit yakking and get to work...
Friday, February 17, 2012
Puttering Around Yesterday
Stayed home not-entirely-well yesterday, tired and with a sinus headache. Not exactly ill, but not happy and healthy, either. I could have put up with being tired or with the headache, but both together stole my give-a-damn.
Eventually I did start puttering around.
I got inventory updated with the pouches finished recently, but never got as far as going out to put them in the big yellow road case. Then I moved out to the workroom, rooted around, and updated a list of cut out pouches/parts that I'd found on the iPad. As part of updating that I made some decisions on what colors some pouches would be.
I didn't feel up to serious work on purses or the new steampunk-ish thing at first, so I cut some small soft pouch parts out of larger pieces of scrap. I did get as far as cutting out the largest piece of the new steampunk-ish thing, but then I stalled out.
I have a (mental) pile of things that need to be dyed black, including the piece I'd just cut out in the previous paragraph, but I wasn't sure I wanted to be messing with the black dye, which has a definite petrochemical pong, when I already had a headache. I also wasn't up to deciding if I wanted to dye in the basement or outside, or would it be better to dye another day this weekend, or . . .
"Go upstairs and take a nice hot bath" was the ultimate decision.
Eventually I did start puttering around.
I got inventory updated with the pouches finished recently, but never got as far as going out to put them in the big yellow road case. Then I moved out to the workroom, rooted around, and updated a list of cut out pouches/parts that I'd found on the iPad. As part of updating that I made some decisions on what colors some pouches would be.
I didn't feel up to serious work on purses or the new steampunk-ish thing at first, so I cut some small soft pouch parts out of larger pieces of scrap. I did get as far as cutting out the largest piece of the new steampunk-ish thing, but then I stalled out.
I have a (mental) pile of things that need to be dyed black, including the piece I'd just cut out in the previous paragraph, but I wasn't sure I wanted to be messing with the black dye, which has a definite petrochemical pong, when I already had a headache. I also wasn't up to deciding if I wanted to dye in the basement or outside, or would it be better to dye another day this weekend, or . . .
"Go upstairs and take a nice hot bath" was the ultimate decision.
Wednesday, February 15, 2012
Shopping and Other Odds and Ends
Shopping this morning.
I ordered hardware, mostly for belts. After looking at how much I was getting there, I decided I don't actually need any of the leather I was sorta-kinda thinking about. I could have made the hardware order a bit smaller, but I decided that its time to just cut some of the old-style hardware off of belts and replace it with the newer (and prettier) stuff.
Then I ordered books. I was going to order a couple by the person who designed a line of CAS (Cowboy Action Shooting) and Civil War era patterns I like, but I distracted myself by finding a book on making bridles and related tack, by the author of a book on making harness that I like. I also ordered a book on coming up with western-style floral tooling patterns "for the Artistically Impaired", mostly for Ron. Who isn't exactly artistically impaired, but isn't necessarily confident on coming up with his own designs for tooling.
Finally, I ordered the umpty-dozen little red plastic bins I'd decided on for sorting hardware in the big green tool chest. I should put my drawer layouts into Illustrator or CAD or something, so I have them down the road.
Yesterday I stopped at Cabela's for end pieces for wooden ramps to go between the ground and the side porch. I'll be taking them back today, as they're only 8" wide. The ones at Lowe's, which is less convenient to get to, are 10" wide, and $5 cheaper. I was willing to consider the price difference a convenience tax, but we want the extra width.
Although I didn't get as far as cutting out leather for the new steampunk-ish thing we came up with on Monday, I did get the pattern about 95% figured out.
The tendons that extend my index and middle fingers on my right hand were quite unhappy all day yesterday, I did too much over the weekend. They're feeling better today, not sure if it's because I tried to sleep with my hand in good positions (not flat, not curled up too tight, wrist not cocked), OTC anti-inflammatory, or both. I think I'll skip doing any lacing today to try to encourage my hand to be happy.
I ordered hardware, mostly for belts. After looking at how much I was getting there, I decided I don't actually need any of the leather I was sorta-kinda thinking about. I could have made the hardware order a bit smaller, but I decided that its time to just cut some of the old-style hardware off of belts and replace it with the newer (and prettier) stuff.
Then I ordered books. I was going to order a couple by the person who designed a line of CAS (Cowboy Action Shooting) and Civil War era patterns I like, but I distracted myself by finding a book on making bridles and related tack, by the author of a book on making harness that I like. I also ordered a book on coming up with western-style floral tooling patterns "for the Artistically Impaired", mostly for Ron. Who isn't exactly artistically impaired, but isn't necessarily confident on coming up with his own designs for tooling.
Finally, I ordered the umpty-dozen little red plastic bins I'd decided on for sorting hardware in the big green tool chest. I should put my drawer layouts into Illustrator or CAD or something, so I have them down the road.
Yesterday I stopped at Cabela's for end pieces for wooden ramps to go between the ground and the side porch. I'll be taking them back today, as they're only 8" wide. The ones at Lowe's, which is less convenient to get to, are 10" wide, and $5 cheaper. I was willing to consider the price difference a convenience tax, but we want the extra width.
Although I didn't get as far as cutting out leather for the new steampunk-ish thing we came up with on Monday, I did get the pattern about 95% figured out.
The tendons that extend my index and middle fingers on my right hand were quite unhappy all day yesterday, I did too much over the weekend. They're feeling better today, not sure if it's because I tried to sleep with my hand in good positions (not flat, not curled up too tight, wrist not cocked), OTC anti-inflammatory, or both. I think I'll skip doing any lacing today to try to encourage my hand to be happy.
Monday, February 13, 2012
Capricon Weekend
Even though Otter Necessities wasn't in the Capricon Dealers' Room, it was a busy long weekend.
Thursday night and Friday morning I worked on 5 soft pouches that I'd cut out previously (ages previously), getting them marked, lacing holes punched, and latches installed. Two had separate flaps, which made them more challenging to get ready, but by the time Robin and I left Friday morning I had all five with me and ready to lace, along with a little squarish pouch I'd already started work on.
Friday I hung out in the Cafe, did some Cafe-related work, and worked on pouches. Due to a SNAFU with dinner I didn't leave the hotel until 8:30 or so, without dinner. We were out of eggs to add to Eowyn's dinner, so I stopped at Wendy's and got a bunch of plain grilled chicken sandwiches and burgers. The dogs were quite content to share with me for dinner.
Saturday morning, instead of digging in the big yellow road case for a stitched paperback cover as an example of one of the class projects for the sewing class at MuseCon, I cut one out and got it ready to sew together, as well as a keychain (I couldn't find the example keychain I made last year - not terribly surprising). I also grabbed all the tools that would make up the sewing kit that students can order, and one of the jewelry display cases we'd gotten from Ron's sister to keep people from hurting themselves on the awl.
More hanging out in the Cafe, plus at the MuseCon sales table. Sewed up the book cover and the keychain, then back to lacing. Helped set up the MuseCon party, and eventually went home, stopping for more sandwiches for the dogs (had pizza during party setup myself). During setup for the party Ron called from the Cafe and asked how much one of the pouches I'd finished was. It went home with a friend of ours. :)
Over the weekend I finished off the little squarish soft pouch, 3 of the 5 larger soft pouches, a book cover, the keychain (not that it was a big deal), and did work on the last two larger soft pouches. Sunday (and yesterday) I did no lacing, I was pooped.
Yesterday was kind of a rest day.
After sleeping in we went shopping for Otter Necessities. We got a small UPS to run the iPad at events so Ron can do more of the record-keeping (he's currently modified my sales spreadsheet for at-event use), and ramps for trailer use. At lunch I came up with a couple pouch/pocket ideas. I hoped to get started on one of them in the afternoon, but was interrupted by a dirty dishes, then flailing around with TurboCad, Illustrator, and laptop-desktop synchronization. Perhaps tonight.
Not that I was terribly awake anyway. Early to bed last night. Good thing I decided to do Maidens instead of Capricon - there were three other people with leather goods, although none with primarily belts and pouches. We even bought from one of them - although corsets, not leather. And several admired Robin's steampunk-ish pockets I'd made him for his birthday.
Sunday morning we dropped off the dark green, navy, and black whole hides off with Alt Kilt to have made up for Ron. And I did succeed in not touching the money I'd set aside from Maidens to pay for it.
I typed up almost all of this yesterday on the iPad as part of testing how long the UPS would power it, but ran into a problem when I tried to post - all the paragraph breaks were lost, and when I tried to edit blogger gave me a blank window. Fortunately, I was able to revert to draft and not lose the text.
Same problem today, so I published the one-ginormous-paragraph post, copied, reverted to draft, went into edit mode (and got no text yet another time), pasted and actually edited. Grumble.
Stopping tonight for end pieces to make ramps to get from the side porch to the ground. The folding metal ramps we got yesterday are too short to work on the porch. We considered returning them and just getting two sets of metal end pieces and 2-bys to make wooden ramps, but the metal ones fold up to a nice compact size, and won't require any measures to prevent warpage.
Thursday night and Friday morning I worked on 5 soft pouches that I'd cut out previously (ages previously), getting them marked, lacing holes punched, and latches installed. Two had separate flaps, which made them more challenging to get ready, but by the time Robin and I left Friday morning I had all five with me and ready to lace, along with a little squarish pouch I'd already started work on.
Friday I hung out in the Cafe, did some Cafe-related work, and worked on pouches. Due to a SNAFU with dinner I didn't leave the hotel until 8:30 or so, without dinner. We were out of eggs to add to Eowyn's dinner, so I stopped at Wendy's and got a bunch of plain grilled chicken sandwiches and burgers. The dogs were quite content to share with me for dinner.
Saturday morning, instead of digging in the big yellow road case for a stitched paperback cover as an example of one of the class projects for the sewing class at MuseCon, I cut one out and got it ready to sew together, as well as a keychain (I couldn't find the example keychain I made last year - not terribly surprising). I also grabbed all the tools that would make up the sewing kit that students can order, and one of the jewelry display cases we'd gotten from Ron's sister to keep people from hurting themselves on the awl.
More hanging out in the Cafe, plus at the MuseCon sales table. Sewed up the book cover and the keychain, then back to lacing. Helped set up the MuseCon party, and eventually went home, stopping for more sandwiches for the dogs (had pizza during party setup myself). During setup for the party Ron called from the Cafe and asked how much one of the pouches I'd finished was. It went home with a friend of ours. :)
Over the weekend I finished off the little squarish soft pouch, 3 of the 5 larger soft pouches, a book cover, the keychain (not that it was a big deal), and did work on the last two larger soft pouches. Sunday (and yesterday) I did no lacing, I was pooped.
Yesterday was kind of a rest day.
After sleeping in we went shopping for Otter Necessities. We got a small UPS to run the iPad at events so Ron can do more of the record-keeping (he's currently modified my sales spreadsheet for at-event use), and ramps for trailer use. At lunch I came up with a couple pouch/pocket ideas. I hoped to get started on one of them in the afternoon, but was interrupted by a dirty dishes, then flailing around with TurboCad, Illustrator, and laptop-desktop synchronization. Perhaps tonight.
Not that I was terribly awake anyway. Early to bed last night. Good thing I decided to do Maidens instead of Capricon - there were three other people with leather goods, although none with primarily belts and pouches. We even bought from one of them - although corsets, not leather. And several admired Robin's steampunk-ish pockets I'd made him for his birthday.
Sunday morning we dropped off the dark green, navy, and black whole hides off with Alt Kilt to have made up for Ron. And I did succeed in not touching the money I'd set aside from Maidens to pay for it.
I typed up almost all of this yesterday on the iPad as part of testing how long the UPS would power it, but ran into a problem when I tried to post - all the paragraph breaks were lost, and when I tried to edit blogger gave me a blank window. Fortunately, I was able to revert to draft and not lose the text.
Same problem today, so I published the one-ginormous-paragraph post, copied, reverted to draft, went into edit mode (and got no text yet another time), pasted and actually edited. Grumble.
Stopping tonight for end pieces to make ramps to get from the side porch to the ground. The folding metal ramps we got yesterday are too short to work on the porch. We considered returning them and just getting two sets of metal end pieces and 2-bys to make wooden ramps, but the metal ones fold up to a nice compact size, and won't require any measures to prevent warpage.
Thursday, February 9, 2012
Neigbors, and Other Musings
Turns out my post wasn't eaten! Yay for auto-save!
The other day Ron reminded me that we stopped doing SF conventions because the cost is much higher than SCA events, and the rate of sales for a whole weekend of a convention typically about equals that of a one-day SCA event. Oops, yeah. On the third hand, it's kinda fun to be in the Dealers' Room. In an odd way. Provided the neighbors are decent and sales don't suck.
Speaking of which, neighbors can be a big factor in how much fun any event is.
Being a good neighbor doesn't have to mean being super-friendly and chatty and whatnot. A pleasant demeanor and polite, even though you don't feel like having a conversation, is fine.
Things that particularly annoy me in a neighboring merchant:
Amoebas/Space-Hogs - As a merchant with a lot of stuff, I can sympathize with this one, and I hope I don't fail to behave when faced with the challenge of getting everything out and arranged, while still leaving enough runway space between merchants (side-to-side and/or back-to-back). What really gets me on this one are the people, especially at a multi-day event, that spend the entire time pushing the boundaries. Oozing over a little more this way, then a little more that way. Oy, I could tell stories. Tape outlines on the floor help. A lot.
As a corollary, merchants that will set up Their Way, damn what the organizer was trying to achieve with traffic flow.
Chronic Late Arrival and Early Departure - Maybe if you'd be here and set up on time and didn't leave early you'd actually get some sales! There's a pattern to sales (one-day/weekend) - some sales early (AM just after setup/Friday), reasonably slack time, but with lots of browsing, through most of the event (morning, early afternoon/Saturday), then most of the sales about 3/4 of the way through the event (mid-afternoon/Saturday afternoon and evening, when vendors open Sunday morning), then tapering off toward the tail end (late afternoon to evening/late-morning to closing time Sunday). If you miss that first round, and leave before the buying starts later, yes, your sales will suck. And you're distracting my customers!
Cranky - nobody is a bundle of happy when setting up or tearing down, I get that; but don't take it out on other merchants, and it's just plain stupid to inflict your bad day on your potential customers.
Some hints to organizers:
Ron's ran the DucKon dealers' room for several years, and I was his his second for a couple of them, so these are compiled from our experience both running the room and being vendors. (I think I have a bunch more of these somewhere...)
The other day Ron reminded me that we stopped doing SF conventions because the cost is much higher than SCA events, and the rate of sales for a whole weekend of a convention typically about equals that of a one-day SCA event. Oops, yeah. On the third hand, it's kinda fun to be in the Dealers' Room. In an odd way. Provided the neighbors are decent and sales don't suck.
Speaking of which, neighbors can be a big factor in how much fun any event is.
Being a good neighbor doesn't have to mean being super-friendly and chatty and whatnot. A pleasant demeanor and polite, even though you don't feel like having a conversation, is fine.
Things that particularly annoy me in a neighboring merchant:
Amoebas/Space-Hogs - As a merchant with a lot of stuff, I can sympathize with this one, and I hope I don't fail to behave when faced with the challenge of getting everything out and arranged, while still leaving enough runway space between merchants (side-to-side and/or back-to-back). What really gets me on this one are the people, especially at a multi-day event, that spend the entire time pushing the boundaries. Oozing over a little more this way, then a little more that way. Oy, I could tell stories. Tape outlines on the floor help. A lot.
As a corollary, merchants that will set up Their Way, damn what the organizer was trying to achieve with traffic flow.
Chronic Late Arrival and Early Departure - Maybe if you'd be here and set up on time and didn't leave early you'd actually get some sales! There's a pattern to sales (one-day/weekend) - some sales early (AM just after setup/Friday), reasonably slack time, but with lots of browsing, through most of the event (morning, early afternoon/Saturday), then most of the sales about 3/4 of the way through the event (mid-afternoon/Saturday afternoon and evening, when vendors open Sunday morning), then tapering off toward the tail end (late afternoon to evening/late-morning to closing time Sunday). If you miss that first round, and leave before the buying starts later, yes, your sales will suck. And you're distracting my customers!
Cranky - nobody is a bundle of happy when setting up or tearing down, I get that; but don't take it out on other merchants, and it's just plain stupid to inflict your bad day on your potential customers.
Some hints to organizers:
Ron's ran the DucKon dealers' room for several years, and I was his his second for a couple of them, so these are compiled from our experience both running the room and being vendors. (I think I have a bunch more of these somewhere...)
- Think about traffic flow. Dead end alleys or strange intersections are bad ideas.
- Leave large enough aisles for the customers. 8' wide MINIMUM. Especially-minimum if there's going to be many women in hoops (Elizabethan, steampunk).
- Leave enough space behind the tables/inside islands. We were in an island once where the backs of the vendors' chairs were up against the tables on the opposite sides. (bathroom breaks for the people on the ends were A Production) Thank Ghu we had good neighbors!
- Low-tack masking tape is your friend.
- Cruise the room during setup (nip setup issues in the bud!), occasionally during the day(s), and let the vendors know where to look for you other times.
- Let your vendors know setup, opening, closing, and teardown times before they get there.
- We are frail, shallow, human creatures. Feed us and we will love you.
Carp. Catfish. Bottom-Feeders.
I had this nice post all about neighboring merchants almost done, and my browser crashed. Feh.
Contacted organizers and sent off reservation information for the Midlands Regional Arts & Sciences Fair at the end of the month.
Still haven't cut out little square-ish soft black pouches. Perhaps tonight, but baking binge for the MuseCon party Saturday night has priority.
Contacted organizers and sent off reservation information for the Midlands Regional Arts & Sciences Fair at the end of the month.
Still haven't cut out little square-ish soft black pouches. Perhaps tonight, but baking binge for the MuseCon party Saturday night has priority.
Tuesday, February 7, 2012
Fooling Myself
In my follow-up post about Maidens I attributed low belt sales to the presence of another merchant.
That was probably not the true cause.
I've been slacking. Both at Boar's Head and Maidens I let Ron and Xap do most of the selling, worse at Maidens, and I kind of skulked around not talking to customers as much as I should.
Besides not selling many belts at Maidens, we didn't have any sales of more than one item (of note - I don't count two mug loops or two pieces of hardware) - nobody bought a belt and a pouch, no couples bought a belt each, yadda yadda. That's . . . just wrong. The only time that should happen is a horrible, awful, no-good, bad-sales day.
I suppose one could blame it on lots of customers being broke college students, but I don't think so. We had things set up so brown belts and black belts weren't direct line-of-sight from eacho other, which I think was a mistake, but I don't think that was it either.
Xap is good at sales, but it was only her second time out. Ron isn't as good as I am (although I haven't had to tell him to go away so we'll get sales for years now). I know the inventory. I know my schtick. I've got it ingrained to keep cheerful, and for some strange reason my "customer service" voice is a half-octave to an octave higher than my normal voice (really throws people who haven't heard me use it before).
I got it ingrained when I was in college, my family bought a Swiss Colony cheese store/franchise, and I went to the "University of Swiss Colony" managers session for two weeks, where I learned to walk the lease-line (front edge of your store, in a mall setting), and tell the customer to "Eat this or eat the fondue fork!" Ok, not really, but I felt like it sometimes. They taught high-pressure sales. The WSM and I couldn't stomach the used-car salesman level of pushy, but I did learn to talk to the customers and suggest and nudge and whatnot.
(BTW, if you know my dad, who can be pretty laid back, watching him do samples on the lease-line was fun!)
I need to get back on the job, and go back to being a salescritter.
Ron and I were discussing this a couple days ago, and I said I need to let him do the sales recording and making change and whatnot . . . which means I have to decipher his handwriting . . .
Ron pointed out that he's actually a decent 10-fingered (in Dvorak) typist any more, and I already have a bluetooth keyboard paired with the iPad, which has the iPad version of Numbers (spreadsheet) installed. The iPad already goes to events with us, so we'd just have to set up a spreadsheet for recording sales (when people don't want/need a receipt), and bring the keyboard.
The only bug there is power - the iPad probably won't last a busy day. So we'll look at the charging station/radios we've seen at hardware stores and UPSes to figure out what will power the iPad (which draws more power than a standard iPhone/iPod, so not all USB connections will do), won't weigh a ton, and hits a reasonable spot on the price curve. For the radio/charging station thingies we'll probably take the iPad and cable to Berland's House of Tools, it's probably easier to explain why we need to unpack one and try before buying there than Home Depot or Menard's.
Looking at doing the Midlands Regional Arts and Sciences Fair at the end of this month (see link in the sidebar), so that means the Monday after Capricon, which Ron's taking off for recovery and I've got off as a State of Illinois employee, we'll be out looking at power options, and getting ramp ends and lumber. And once we're confirmed I need to reserve a trailer.
Yes, we need to buy a smaller trailer. And the best way to get the fundage for that (unless we tap the tax return) is to . . . do more events!
I'm also toying with the idea of being a dealer at WindyCon this year, since I'm not doing Publications.
Working the Capricon Cafe, so Cap is out. Duck is out for one reason and another. MuseCon I'm waaayyyy to busy for, and I have mostly finished goods, not materials/supplies. Reenactor Fest/Military History Fest (changing names) was last week, and our stuff isn't quite right anyway. Must think/look about other conventions.
That was probably not the true cause.
I've been slacking. Both at Boar's Head and Maidens I let Ron and Xap do most of the selling, worse at Maidens, and I kind of skulked around not talking to customers as much as I should.
Besides not selling many belts at Maidens, we didn't have any sales of more than one item (of note - I don't count two mug loops or two pieces of hardware) - nobody bought a belt and a pouch, no couples bought a belt each, yadda yadda. That's . . . just wrong. The only time that should happen is a horrible, awful, no-good, bad-sales day.
I suppose one could blame it on lots of customers being broke college students, but I don't think so. We had things set up so brown belts and black belts weren't direct line-of-sight from eacho other, which I think was a mistake, but I don't think that was it either.
Xap is good at sales, but it was only her second time out. Ron isn't as good as I am (although I haven't had to tell him to go away so we'll get sales for years now). I know the inventory. I know my schtick. I've got it ingrained to keep cheerful, and for some strange reason my "customer service" voice is a half-octave to an octave higher than my normal voice (really throws people who haven't heard me use it before).
I got it ingrained when I was in college, my family bought a Swiss Colony cheese store/franchise, and I went to the "University of Swiss Colony" managers session for two weeks, where I learned to walk the lease-line (front edge of your store, in a mall setting), and tell the customer to "Eat this or eat the fondue fork!" Ok, not really, but I felt like it sometimes. They taught high-pressure sales. The WSM and I couldn't stomach the used-car salesman level of pushy, but I did learn to talk to the customers and suggest and nudge and whatnot.
(BTW, if you know my dad, who can be pretty laid back, watching him do samples on the lease-line was fun!)
I need to get back on the job, and go back to being a salescritter.
Ron and I were discussing this a couple days ago, and I said I need to let him do the sales recording and making change and whatnot . . . which means I have to decipher his handwriting . . .
Ron pointed out that he's actually a decent 10-fingered (in Dvorak) typist any more, and I already have a bluetooth keyboard paired with the iPad, which has the iPad version of Numbers (spreadsheet) installed. The iPad already goes to events with us, so we'd just have to set up a spreadsheet for recording sales (when people don't want/need a receipt), and bring the keyboard.
The only bug there is power - the iPad probably won't last a busy day. So we'll look at the charging station/radios we've seen at hardware stores and UPSes to figure out what will power the iPad (which draws more power than a standard iPhone/iPod, so not all USB connections will do), won't weigh a ton, and hits a reasonable spot on the price curve. For the radio/charging station thingies we'll probably take the iPad and cable to Berland's House of Tools, it's probably easier to explain why we need to unpack one and try before buying there than Home Depot or Menard's.
Looking at doing the Midlands Regional Arts and Sciences Fair at the end of this month (see link in the sidebar), so that means the Monday after Capricon, which Ron's taking off for recovery and I've got off as a State of Illinois employee, we'll be out looking at power options, and getting ramp ends and lumber. And once we're confirmed I need to reserve a trailer.
Yes, we need to buy a smaller trailer. And the best way to get the fundage for that (unless we tap the tax return) is to . . . do more events!
I'm also toying with the idea of being a dealer at WindyCon this year, since I'm not doing Publications.
Working the Capricon Cafe, so Cap is out. Duck is out for one reason and another. MuseCon I'm waaayyyy to busy for, and I have mostly finished goods, not materials/supplies. Reenactor Fest/Military History Fest (changing names) was last week, and our stuff isn't quite right anyway. Must think/look about other conventions.
Monday, February 6, 2012
Rest of the Weekend
Saturday evening we finished up making flyers for the Capricon Cafe. I never did look up the keystroke combination to get the accented E for "cafe", but I did grab it from the glyphs panel every time it was needed in the flyers. Ron figured out how to easily do clever warpy things in Illustrator, that are difficult to impossible to do in InDesign, then walked me through the process.
Yesterday morning I did the books from Maidens (except, I now realize, adding the belts I made to inventory). Having the belts in the big green road case is nice: I was able to go check something easily. The drawers are all shallow enough nothing gets buried too deeply, and I know exactly which drawers to check.
More errands yesterday morning, but at least they were quick. One of them was to one of the office superstores, where I got paper to print "care and feeding" handouts on, and a gross each of small and medium binder clips (clamps for gluing, and pin-alternatives when making leather satchels and belt satchels). I figured I'd just buy not-quite-stupid amounts all at once, instead of a couple boxes here, a couple boxes there as they get lost/wander off.
In the afternoon I went out to the dining room to work on things. I was going to work on the purses I'd cut out previously, but I decided to do little square-ish soft pouches instead:
A while back I set the body part of latches an inch too low on three red pouch fronts, so I cut out new (black) backs, with flaps an extra inch long. I got those partly along.
While cutting out the black long-flap pieces, I cut out some normal sized bits. I ended up with parts for a full pouch, and a spare front. Not sure what I'm doing with the spare front, I'll figure something out. I may have another piece of the same leather, which would be the simple (but boring) answer.
As a ripple effect from the issue with the red pouch fronts, I ended up with three black backs, cut out of the last of a piece of leather. Instead of trying to find similar leather to make the fronts from, I decided to make them with really obviously not-matching fronts. I'm going to make the fronts for those from the green I used on the harmonica pouch a while back, orange (yes, I have a piece of bright orange leather, don't ask), and dark purple (a couple/few years ago I ordered a piece of black leather, when I opened it up, it was purple! I decided to keep it.). All three pieces of colored leather are fairly lightweight, but I have some really really cheap clean-the-warehouse . . . stuff I can use as backing. I haven't cut those out yet.
In the end, I got one in black, and in brown that I'd cut out ages ago ready to lace together, and enough lacing done on each that I won't lose the belt loops.
I still need to make more all-black little square-ish soft pouches. Boring. But they sell. OTOH, so do the purses. Aieee! decisions!
However I end up prioritizing little soft pouches and the purses, when I get down to the lacing I'll probably end up alternating - black thing, not-black thing (or not all black). That helps me stay sane...
Looks like the leather sewing class at MuseCon is going to be Friday evening, starting at 9 pm. I wanted it early enough in the weekend that people could possibly work on projects outside of class, and be able to find Ron or I if they need help.
Which reminds me, MuseCon class registration is slated to be up and running for the MuseCon party at Capricon, which is Saturday night. Yes, the grid is built, and it's pretty full. Hopefully, I can get a paper printout of the current grid to have at the party - it impresses people to put a copy of the schedule, even if it does still have a few holes, in their hands.
Tonight I need to update the MuseCon party flyers with our room number, and possibly attack a grid brochure.
Yesterday morning I did the books from Maidens (except, I now realize, adding the belts I made to inventory). Having the belts in the big green road case is nice: I was able to go check something easily. The drawers are all shallow enough nothing gets buried too deeply, and I know exactly which drawers to check.
More errands yesterday morning, but at least they were quick. One of them was to one of the office superstores, where I got paper to print "care and feeding" handouts on, and a gross each of small and medium binder clips (clamps for gluing, and pin-alternatives when making leather satchels and belt satchels). I figured I'd just buy not-quite-stupid amounts all at once, instead of a couple boxes here, a couple boxes there as they get lost/wander off.
In the afternoon I went out to the dining room to work on things. I was going to work on the purses I'd cut out previously, but I decided to do little square-ish soft pouches instead:
A while back I set the body part of latches an inch too low on three red pouch fronts, so I cut out new (black) backs, with flaps an extra inch long. I got those partly along.
While cutting out the black long-flap pieces, I cut out some normal sized bits. I ended up with parts for a full pouch, and a spare front. Not sure what I'm doing with the spare front, I'll figure something out. I may have another piece of the same leather, which would be the simple (but boring) answer.
As a ripple effect from the issue with the red pouch fronts, I ended up with three black backs, cut out of the last of a piece of leather. Instead of trying to find similar leather to make the fronts from, I decided to make them with really obviously not-matching fronts. I'm going to make the fronts for those from the green I used on the harmonica pouch a while back, orange (yes, I have a piece of bright orange leather, don't ask), and dark purple (a couple/few years ago I ordered a piece of black leather, when I opened it up, it was purple! I decided to keep it.). All three pieces of colored leather are fairly lightweight, but I have some really really cheap clean-the-warehouse . . . stuff I can use as backing. I haven't cut those out yet.
In the end, I got one in black, and in brown that I'd cut out ages ago ready to lace together, and enough lacing done on each that I won't lose the belt loops.
I still need to make more all-black little square-ish soft pouches. Boring. But they sell. OTOH, so do the purses. Aieee! decisions!
However I end up prioritizing little soft pouches and the purses, when I get down to the lacing I'll probably end up alternating - black thing, not-black thing (or not all black). That helps me stay sane...
Looks like the leather sewing class at MuseCon is going to be Friday evening, starting at 9 pm. I wanted it early enough in the weekend that people could possibly work on projects outside of class, and be able to find Ron or I if they need help.
Which reminds me, MuseCon class registration is slated to be up and running for the MuseCon party at Capricon, which is Saturday night. Yes, the grid is built, and it's pretty full. Hopefully, I can get a paper printout of the current grid to have at the party - it impresses people to put a copy of the schedule, even if it does still have a few holes, in their hands.
Tonight I need to update the MuseCon party flyers with our room number, and possibly attack a grid brochure.
Saturday, February 4, 2012
Bleargh. Argh. Sickly Otter.
Stayed home with a head cold yesterday, with Robin.
Mostly worked on design stuff - posters and flyers for the Capricon Cafe, and new banner designs for Otter Necessities. I'll post the current designs at the end.
Today was the typical Saturday running-about. Ran out to Tandy/Leather Factory. I only meant to get a look at/for brown pre-waxed thread, but several tools and a pretty bright yellow whole upholstery hide followed us home. I think it wants to be pouches, etc. with black trim. First probably a satchel and a belt satchel, and at the same time I should cut the same things out of the bright blue hide I got a while back.
This afternoon I poked around looking for black artificial sinew. I'm generally content with waxing my linen thread (except when I'm feeling lazy), but Ron likes the artificial sinew, so we'll get him what he likes. None at Tandy/LF, but I found several suppliers on-line. I was waffling which to buy from, when I noticed that Noc Bay Trading Company, which has mostly Native American stuff, is in Escanaba, MI. My dad grew up in (and I've spent lots of time in) Gladstone, which is the next town up the bay, so I decided that made them "local" and ordered a spool.
Less successful has been my hunt for colored smooth lace. A little while back I checked to see if my supplier, Marcellus-Oriva Leather Co. had yellow lace. No, and they didn't have the red, green, or blue I'd bought from there before, either. Today I was looking for other suppliers of colored lace and noticed that M-O's website is defunct. Oh no! Hoping they just gave up on it and didn't go out of business, but worried. I can probably find another decent source of black and brown lace, but not much luck on not-suede colors.
Ok, back to banners. First I did a vertical banner (2' x 4'). It's my favorite of the ones I did yesterday:
Then Ron asked if I was going to do a new horizontal one. Our existing banner is still good, but apparently I'd thought of a new one to match the horizontal. So I did that (4' x 2'). Much futzing around later, I think this is decent:
Then I did a square, 2' x 2', for times we might not have room for one of the bigger ones.
Then, for the heck of it, I did a 2' x 1' horizontal. Because one place I'm looking at on-line only charges $3.75/square foot, and coming up with designs doesn't cost me anything unless I actually buy a banner.
It occured to me today, that if places don't want to do anything smaller than 2' x 4' I can just do the square and a couple small ones on one panel, cut and hem myself. And Ron pointed out that if I put the small ones on right I can have a double-sided small banner. He is S-M-R-T smart.
And now dinner is beeping that it's done, so time to go.
Subscribe to:
Posts (Atom)
Posts
